Breaking

Wednesday, April 11, 2018

Carrier Load Estimating Level 2 Fundamentals-TDP 301


Technical Development Programs(TDP) are modules of technical training on HVAC theory, system design, equipment selection and application topics. They are targeted at engineers and designers who wish to develop their knowledge in this field to effectively design, specify, sell or apply HVAC equipment in commercial applications.
Although TDP topics have been developed as stand-alone modules, there are logical groupings of topics. The modules within each group begin at an introductory level and progress to advanced levels. The breadth of this offering allows for customization into a complete HVAC curriculum – from a complete HVAC design course at an introductory-level or to an advancedlevel design course. Advanced-level modules assume prerequisite knowledge and do not review basic concepts.
The fundamentals of commercial load estimating are needed to understand the various load components that go into making a practical estimate of the amount of heating and/or cooling energy needed to condition a building. Done properly, a load estimate provides the data necessary to select heating and cooling equipment that can condition the spaces within a building. If the characteristics of the load components for the building and the HVAC system are known, then an analysis of the application can be used to come up with the correct load and equipment selections to complete the design. Along with psychrometrics, load estimating establishes the foundation upon which HVAC system design and operation occur.
Load Estimating, Level 2: Fundamentals is the second in a four-part series on load estimating. It is preceded by an overview of the topic and followed by two TDPs that review the procedures for completing block and zone load estimates and refinements required for preparing a system-based design load estimate.
Download Now : 
See also :
Carrier Load Estimating Level 1 Overview-TDP 300

No comments:

Post a Comment